publication venue for

• Synchronized electrospinning and electrospraying technique for manufacturing of all-solid-state lithium-ion batteries 2019
• Electrochemically induced fractures in-crystalline silicon anodes 2019
• Energy-neutral sustainable nutrient recovery incorporated with the wastewater purification process in an enlarged microbial nutrient recovery cell 2018
• Flash transition as a possible origin for low open circuit voltage in thin film solid oxide fuel cells 2017
• Energy harvesting influences electrochemical performance of microbial fuel cells 2017
• Current limit diagrams for dendrite formation in solid-state electrolytes for Li-ion batteries 2017
• Iron-rich nanoparticle encapsulated, nitrogen doped porous carbon materials as efficient cathode electrocatalyst for microbial fuel cells 2016
• Three-dimensional architecture of lithium-anodes made from graphite fibers coated with thin-films of silicon oxycarbide: Design, performance and manufacturability 2016
• On uncertainty quantification of lithium-ion batteries: Application to an LiC6/LiCoO2 cell 2015
• AC power generation from microbial fuel cells 2015
• Mechanism of hydrofluoric acid formation in ethylene carbonate electrolytes with fluorine salt additives 2015
• Electrospun polyacrylonitrile microfiber separators for ionic liquid electrolytes in Li-ion batteries 2015
• Mitigating irreversible capacity losses from carbon agents via surface modification 2015
• Silicon algae with carbon topping as thin-film anodes for lithium-ion microbatteries by a two-step facile method 2015
• Corrosion of stainless steel battery components by bis(fluorosulfonyl)imide based ionic liquid electrolytes 2014
• Towards understanding the rate capability of layered transition metal oxides LiNiyMnyCo1-2yO2 2014
• Electrochemically induced and orientation dependent crack propagation in single crystal silicon 2014
• Effect of organic solvent addition to PYR13FSI + LiFSI electrolytes on aluminum oxidation and rate performance of Li(Ni1/3Mn1/3Co1/3)O-2 cathodes 2014
• Microstructural evolution induced by micro-cracking during fast lithiation of single-crystalline silicon 2014
• Unexpected high power performance of atomic layer deposition coated Li[Ni1/3Mn1/3Co1/3]O-2 cathodes 2014
• A design optimization methodology for Li+ batteries 2014
• Diffusive relaxation of Li in particles of silicon oxycarbide measured by galvanostatic titrations 2014
• Effect of interface modifications on voltage fade in 0.5Li(2)MnO(3)center dot 0.5LiNi(0.375)Mn(0.375)CO(0.25)O(2) cathode materials 2014
• Microbial fuel cell energy harvesting using synchronous flyback converter 2014
• Power electronic converters for microbial fuel cell energy extraction: Effects of inductance, duty ratio, and switching frequency 2012
• Stable high areal capacity lithium-ion battery anodes based on three-dimensional Ni-Sn nanowire networks 2012
• High efficiency energy harvesting from microbial fuel cells using a synchronous boost converter 2012
• Fabrication of Si core/C shell nanofibers and their electrochemical performances as a lithium-ion battery anode 2012
• Hysteresis controller based maximum power point tracking energy harvesting system for microbial fuel cells 2012
• Anodic properties of hollow carbon nanofibers for Li-ion battery 2012
• Enhancing Ni-Sn nanowire lithium-ion anode performance by tailoring active/inactive material interfaces 2011
• Effects of electrode particle morphology on stress generation in silicon during lithium insertion 2011
• In situ lithiation of TiS2 enabled by spontaneous decomposition of Li3N 2011
• Carbon nanotube modified air-cathodes for electricity production in microbial fuel cells 2011
• Recycled tire crumb rubber anodes for sustainable power production in microbial fuel cells 2011
• Silicon-oxycarbide based thin film anodes for lithium ion batteries 2011
• Electrochemical effects of ALD surface modification on combustion synthesized LiNi1/3Mn1/3Co1/3O2 as a layered-cathode material 2011
• C-rate performance of silicon oxycarbide anodes for Li plus batteries enhanced by carbon nanotubes 2011
• Cyclic stability and C-rate performance of amorphous silicon and carbon based anodes for electrochemical storage of lithium 2011
• Flash-sintering of Co2MnO4 spinet for solid oxide fuel cell applications 2011
• Superefficient thin film multilayer catalyst for generating hydrogen from sodium borohydride 2011
• Ultrahigh figure-of-merit for hydrogen generation from sodium borohydride using ternary metal catalysts 2011
• Preparation of Li2S-GeSe2-P2S5 electrolytes by a single step ball milling for all-solid-state lithium secondary batteries 2010
• Thermodynamic measurements pertaining to the hysteretic intercalation of lithium in polymer-derived silicon oxycarbide 2010
• Optimization of MoO3 nanoparticles as negative-electrode material in high-energy lithium ion batteries 2010
• Electrochemical reactivity of ball-milled MoO3-y as anode materials for lithium-ion batteries 2009
• A picoscale catalyst for hydrogen generation from NaBH4 for fuel cells 2007
• Nanostructured manganese oxides as lithium battery cathode materials 2006
• Stable cycling of thin-film vanadium oxide electrodes between 4 and 0 V in lithium batteries 2003
• First-principles theory of cation and intercalation ordering in LixCoO2 1999
• FABRICATION AND CHARACTERIZATION OF AN LI-MN-O THIN-FILM CATHODE FOR RECHARGEABLE LITHIUM MICROBATTERIES 1995