publication venue for

• Ten questions concerning indoor dust 2026
• Ensuring accurate outdoor thermal comfort research: How to select representative measurement sites for local climate zone 2025
• Characterizing statistical uncertainty and variability of building material emissions in probabilistic whole-building life cycle assessment using kernel density estimation 2025
• Ten questions concerning water quality in building hot water systems 2025
• Development and laboratory evaluation of a do-it-yourself (DIY) filtration solution for residential evaporative coolers to reduce indoor wildfire smoke exposure 2025
• Evaluating the effectiveness of ventilation strategies in mitigating short-term and high-concentration indoor pollutants within a typical apartment building 2025
• A two-part model for evaluation of thermal neutrality for sleeping people (vol 132, pg 319, 2018) 2025
• Optimal design guidelines for net zero energy residential buildings in cooling-dominated climates: Case study of Ghana 2024
• Home indoor air quality and cognitive function over one year for people working remotely during COVID-19 2024
• Dynamic optimization of personal exposure and energy consumption while ensuring thermal comfort in a test house 2024
• Review of adaptive opaque façades and laboratory tests for the dynamic thermal performance characterization 2024
• Accuracy of CFD simulations in urban aerodynamics and microclimate: Progress and challenges 2023
• Ten questions concerning reinforcement learning for building energy management 2023
• Ten questions concerning energy flexibility in buildings 2022
• The economic impacts of carbon emission trading scheme on building retrofits: A case study with US medium office buildings 2022
• Evaluating SARS-CoV-2 airborne quanta transmission and exposure risk in a mechanically ventilated multizone office building 2022
• Decay rates of two tracer gases compared to DNA-tagged liquid aerosol tracer particles: Impact of varying dilution rate and filtration 2022
• Performance of smart glazed overhang systems for US residential buildings 2022
• Air pollutant emissions from multi jet fusion, material-jetting, and digital light synthesis commercial 3D printers in a service bureau 2021
• Characteristics of wind flow around a target building with different surrounding building layers predicted by CFD simulation 2021
• Review and comparison of HVAC operation guidelines in different countries during the COVID-19 pandemic 2021
• Influences of occupant ventilation-behavior during off-periods on indoor thermal environment in intermittently heated buildings 2020
• Exposure to air pollution in indoor walkways of a suburban city 2020
• A new double-skin facade system integrated with TiO₂ plates for decomposing BTEX 2020
• Investigating the influences of ventilation on the fate of particles generated by patient and medical staff in operating room 2020
• Impact of switchable roof insulation on energy performance of US residential buildings 2020
• Facial mask: A necessity to beat COVID-19 2020
• Access to daylight and view in an office improves cognitive performance and satisfaction and reduces eyestrain: A controlled crossover study 2019
• Ten questions concerning the built environment and mental health 2019
• Inverse design of aircraft cabin ventilation by integrating three methods 2019
• The impacts of cooking and an assessment of indoor air quality in Colorado passive and tightly constructed homes 2018
• Literature review on pressure-velocity decoupling algorithms applied to built-environment CFD simulation 2018
• Spatial distribution of building energy use in the United States through satellite imagery of the earth at night 2018
• A two-part model for evaluation of thermal neutrality for sleeping people 2018
• A novel methodology to realistically monitor office occupant reactions and environmental conditions using a living lab 2018
• Investigation of efficient air pollutant removal using active flow control 2017
• Ten questions concerning future buildings beyond zero energy and carbon neutrality 2017
• Inverse modeling of indoor instantaneous airborne contaminant source location with adjoint probability-based method under dynamic airflow field 2017
• Potential energy savings from deployment of Dynamic Insulation Materials for US residential buildings 2017
• Ultraviolet germicidal coil cleaning: Impact on heat transfer effectiveness and static pressure drop 2017
• Ten questions concerning the microbiomes of buildings 2016
• Ten questions concerning integrating smart buildings into the smart grid 2016
• Potential airborne pathogen transmission in a hospital with and without surge control ventilation system modifications 2016
• New semi-Lagrangian-based PISO method for fast and accurate indoor environment modeling 2016
• Ultraviolet germicidal coil cleaning: Decreased surface microbial loading and resuspension of cell clusters 2016
• State-of-the-art methods for inverse design of an enclosed environment 2015
• Theoretical predictions and field measurements for potential natural ventilation in urban vehicular tunnels with roof openings 2014
• Flow visualization study of synthetic flow control in the indoor environment 2014
• Inverse prediction and optimization of flow control conditions for confined spaces using a CFD-based genetic algorithm 2013
• Uncertainty quantification for combined building performance and cost-benefit analyses 2013
• Design optimization of energy efficient residential buildings in Tunisia 2012
• Analyzing grid independency and numerical viscosity of computational fluid dynamics for indoor environment applications 2012
• An ice rink floor thermal model suitable for whole-building energy simulation analysis 2011
• Development of an optimal daylighting controller 2011
• Model-predictive control of mixed-mode buildings with rule extraction 2011
• Genetic-algorithm based approach to optimize building envelope design for residential buildings 2010
• Protecting a whole building from critical indoor contamination with optimal sensor network design and source identification methods 2009
• Special Issue for 2008 International Conference on Building Energy and Environment (COBEE) 2009
• Prompt tracking of indoor airborne contaminant source location with probability-based inverse multi-zone modeling 2009
• Estimation of lighting energy savings from daylighting 2009
• Heat transfer beneath ice-rink floors 2008
• Impact of electricity rate structures on energy cost savings of pre-cooling controls for office buildings 2007
• A simplified method to estimate energy savings of artificial lighting use from daylighting 2005
• Numerical determination and treatment of convective heat transfer coefficient in the coupled building energy and CFD simulation 2004
• Local/global analysis of transient heat transfer from building foundations 2004
• On approaches to couple energy simulation and computational fluid dynamics programs 2002
• Foundation heat loss from heated concrete slab-on-grade floors 2001
• Effects of standard energy conserving measures on thermal comfort 1997
• Effect of spatial variation of soil thermal properties on slab-on-ground heat transfer 1996
• TIME-VARYING HEAT-TRANSFER FROM HORIZONTALLY INSULATED SLAB-ON-GRADE FLOORS 1994
• TIME-VARYING HEAT-TRANSFER FROM SLAB-ON-GRADE FLOORS WITH VERTICAL INSULATION 1994