publication venue for

• Graphene-infused copper: A flash-induced far-from-equilibrium phase transformation 2026
• The dominant role of electrode-interfaces in flash induced electronic conductivity of rutile single crystals 2025
• Touch-free flash sintering of titania: Coupling of reactor and induction currents 2025
• Flash-induced defects in single-crystal 8YSZ characterized by TEM, XRD, and Raman spectroscopy 2024
• Processing map for touch-free flash sintering of a whiteware ceramic 2024
• Current rate flash sintering of nickel at ambient temperature in <1 min 2024
• Can domain knowledge benefit machine learning for concrete property prediction? 2024
• Flash sintering of tungsten at room temperature (without a furnace) in <1 min by injection of electrical currents at different rates 2024
• Touch-free reactive flash sintering of dense strontium hexaferrite permanent magnet 2023
• Capacitive discharge in flash experiments: A discussion of the charged species 2023
• Flash in argon atmosphere yields electronically conducting yttria-stabilized zirconia at ambient temperature 2023
• In-operando synchrotron experiments of flash sintering carried out in current rate mode 2023
• On the confluence of ultrafast high-temperature sintering and flash sintering phenomena 2023
• Reactive flash sintering in a bilayer of zirconia and lanthana: Measurement of the diffusion coefficient in real time 2023
• Room temperature flash of single crystal titania: Electronic and optical properties 2023
• Touch-free flash sintering with magnetic induction within a reactor activated by the usual flash method 2022
• On the catalytic effect of zirconia on flash sintering of alumina 2022
• Hydrolysis protection and sintering of aluminum nitride powders with yttria nanofilms 2022
• In-flash immersion-and-quench of yttria-stabilized zirconia into liquid nitrogen yields an electronic conductor 2022
• Analytical solutions of moisture-chloride ion coupled transport in unsaturated concrete 2021
• Development of a processing map for safe flash sintering of gadolinium-doped ceria 2021
• Flash sintering of yttria-stabilized zirconia powders coated with nanoscale films of alumina by atomic layer deposition 2021
• Precipitous weakening of quartz at the α–β phase inversion 2021
• Precipitous weakening of quartz at theα-βphase inversion 2021
• Thin coatings of hafnon abate oxidative recession of SiC fibers 2021
• Thin coatings of hafnon abate oxidative recession of SiC fibers 2020
• Solid-state sintering of core-shell ceramic powders fabricated by particle atomic layer deposition 2020
• Processing and properties of Bi_0.98R_0.02FeO₃ (R = La, Sm, Y) ceramics flash sintered at ∼650°C in <5 s 2020
• Reactive flash sintering of powders of four constituents into a single phase of a complex oxide in a few seconds below 700°C 2019
• PVA- and PEG-assisted sol-gel synthesis of aluminosilicate precursors for N-A-S-H geopolymer cements 2019
• Chemical equilibrium analysis of silicon carbide oxidation in oxygen and air 2019
• Flash sintering of ceramic films: The influence of surface to volume ratio 2019
• On the synchronicity of flash sintering and phase transformation 2019
• Particle atomic layer deposition of alumina for sintering yttria-stabilized cubic zirconia 2019
• Reactive flash sintering: MgO and α-Al₂O₃ transform and sinter into single-phase polycrystals of MgAl₂O₄ 2019
• On the onset of fracture as a silicon-based polymer converts into the ceramic phase 2019
• Flash sintering with current rate: A different approach 2019
• Partial flocculation for spray drying of spherical mixed metal oxide particles 2018
• AC electric field-induced softening of alkali silicate glasses 2018
• Nanostructured mullite steam oxidation resistant coatings for silicon carbide deposited via atomic layer deposition 2018
• Measurement of O and Ti atom displacements in TiO₂ during flash sintering experiments 2018
• Continuous flash sintering 2018
• Two unique measurements related to flash experiments with yttria-stabilized zircon 2017
• In-situ measurements of lattice expansion related to defect generation during flash sintering 2017
• Flash sintering of highly insulating nanostructured phase-pure BiFeO₃ 2017
• Flash sintering of a three-phase alumina, spinel, and yttria-stabilized zirconia composite 2017
• The role of ceramic and glass science research in meeting societal challenges: Report from an; NSF; ‐sponsored workshop 2017
• Analysis of the Power Density at the Onset of Flash Sintering 2016
• Broadening of Diffraction Peak Widths and Temperature Nonuniformity During Flash Experiments 2016
• Effects of Preform Shear on Tensile Properties of a Woven C/SiC Composite 2016
• Additive Manufacturing of SiCN Ceramic Matrix for SiC Fiber Composites by Flash Pyrolysis of Nanoscale Polymer Films 2016
• The Change of X-ray Diffraction Peak Width During in situ Conventional Sintering of Nanoscale Powders 2016
• Additive Manufacturing of Ceramics Enabled by Flash Pyrolysis of Polymer Precursors with Nanoscale Layers 2016
• The Compelling Case for Indentation as a Functional Exploratory and Characterization Tool 2015
• Bubble Nucleation During Oxidation of SiC 2015
• Emergence and Extinction of a New Phase During On-Off Experiments Related to Flash Sintering of 3YSZ 2015
• Semiconductive Behavior of Polymer-Derived SiCN Ceramics for Hydrogen Sensing 2015
• SiOCN Functionalized Carbon Nanotube Gas Sensors for Elevated Temperature Applications 2015
• Effects of Tow-Scale Holes on the Mechanical Performance of a 3D Woven C/SiC Composite 2015
• Characterizing In-Plane Geometrical Variability in Textile Ceramic Composites 2015
• Electric Fields Obviate Constrained Sintering 2014
• A First Report of Photoemission in Experiments Related to Flash Sintering 2014
• Ab inito and FTIR Studies of HfSiCNO Processed from the Polymer Route 2014
• The Effect of Electric Field on Sintering and Electrical Conductivity of Titania 2014
• Can Die Configuration Influence Field-Assisted Sintering of Oxides in the SPS Process? 2013
• Impedance Spectroscopy and Dielectric Properties of Flash Versus Conventionally Sintered Yttria-Doped Zirconia Electroceramics Viewed at the Microstructural Level 2013
• Chemical Potential-Based Analysis for the Oxidation Kinetics of Si and SiC Single Crystals 2013
• Influence of the Field and the Current Limit on Flash Sintering at Isothermal Furnace Temperatures 2013
• Characterizing Weave Geometry in Textile Ceramic Composites Using Digital Image Correlation 2013
• Limits to the Stability of the Amorphous Nature of Polymer-Derived HfSiCNO Compounds 2013
• Electric Field Assisted Sintering of Cubic Zirconia at 390°C 2013
• Flash Sintering of Anode-Electrolyte Multilayers for SOFC Applications 2013
• Oxidation of Polymer-Derived HfSiCNO up to 1600 degrees C 2013
• Defect Structure of Flash-Sintered Strontium Titanate 2012
• Band or Polaron: The Hole Conduction Mechanism in the p-Type Spinel Rh2ZnO4 2012
• Characterizing Three-Dimensional Textile Ceramic Composites Using Synchrotron X-Ray Micro-Computed-Tomography 2012
• Flash-Sinterforging of Nanograin Zirconia: Field Assisted Sintering and Superplasticity 2012
• Surface Energy of Sol Gel-Derived Silicon Oxycarbide Glasses 2011
• Influence of Externally Imposed and Internally Generated Electrical Fields on Grain Growth, Diffusional Creep, Sintering and Related Phenomena in Ceramics 2011
• A Method for Assessing Reactions of Water Vapor with Materials in High-Speed, High-Temperature Flow 2011
• Flash-Sintering of Cubic Yttria-Stabilized Zirconia at 750°C for Possible Use in SOFC Manufacturing 2011
• Surface Diffusion-Controlled Neck Growth Kinetics in Early Stage Sintering of Zirconia, with and without Applied DC Electrical Field 2011
• Flash Sintering of Nanograin Zirconia in <5 s at 850°C 2010
• From Three-Dimensional Flower-Like α-Ni(OH)₂ Nanostructures to Hierarchical Porous NiO Nanoflowers: Microwave-Assisted Fabrication and Supercapacitor Properties 2010
• Enhanced Sintering Rate of Zirconia (3Y-TZP) Through the Effect of a Weak dc Electric Field on Grain Growth 2010
• Transient Viscous Flow During the Evolution of a Ceramic (Silicon Carbonitride) from a Polymer (Polysilazane) 2010
• Ultrahigh-Temperature Semiconductors Made from Polymer-Derived Ceramics 2010
• Compression Creep of Alumina Containing Interfacial Silicon, Carbon, and Nitrogen, Derived from a Polysilazane Precursor 2010
• Lithium Insertion in Polymer-Derived Silicon Oxycarbide Ceramics 2010
• A Huge Effect of Weak dc Electrical Fields on Grain Growth in Zirconia 2009
• Low-Temperature Atomic Layer-Deposited TiO2 Films with Low Photoactivity 2009
• Porous Al(2)O(3)-Spinel Based Polycrystals That Resist Free-Sintering 2008
• Energetics of Si_xO_yC_z polymer-derived ceramics prepared under varying conditions 2008
• Intensely photoluminescent pseudo-amorphous SiliconOxyCarboNitride polymer-ceramic hybrids 2008
• Thermodynamically stable Si(w)C(x)N(y)O(z) polymer-like, amorphous ceramics made from organic precursors 2008
• Atomic layer deposition on bulk quantities of surfactant-modified single-walled carbon nanotubes 2008
• Novel composites constituted from hafnia and a polymer-derived ceramic as an interface: Phase for severe ultrahigh temperature applications 2007
• Thermodynamically stable Si_xO_yC_z polymer-like amorphous ceramics 2007
• Crystallization maps for SiCO amorphous ceramics 2007
• Multilayer design and evaluation of a high temperature environmental barrier coating for Si-based ceramics 2007
• Mechanical design for accommodating thermal expansion mismatch in multilayer coatings for environmental protection at ultrahigh temperatures 2007
• Novel processing to produce polymer/ceramic nanocomposites by atomic layer deposition 2007
• Selection of TiN as the interconnect material for measuring the electrical conductivity of polymer-derived SiCN at high temperatures 2007
• Mechanical and tribological behavior of polymer-derived ceramics constituted from SiC_xO_yN_z 2006
• Surface modification of titania nanoparticles using ultrathin ceramic films 2006
• Preparation of ultrathin-walled carbon-based nanoporous structures by etching pseudo-amorphous silicon oxycarbide ceramics 2006
• A model for the nanodomains in polymer-derived SiCO 2006
• Effect of steam velocity on the hydrothermal oxidation/volatilization of silicon nitride 2006
• Evaluation of macroscopic and local strains in a three-dimensional woven C/SiC composite 2005
• Passive oxidation of an effluent system: The case of polymer-derived SiCO 2005
• Characterization of nanodomains in polymer-derived SiCN ceramics employing multiple techniques 2005
• Oxidation behavior of SiCN-ZrO2 fiber prepared from alkoxide-modified silazane 2004
• Coating fine nickel particles with Al₂O₃ utilizing an atomic layer deposition-fluidized bed reactor (ALD-FBR) 2004
• Amorphous silicon carbonitride fibers drawn from alkoxide modified Ceraset (TM) 2003
• Integration of ceramics research with the development of a microsystem 2003
• Influence of distributed particle size on the determination of the parabolic rate constant for oxidation by the powder method 2003
• Influence of interfacial roughness on fiber sliding in oxide composites with La-Monazite Interphases 2003
• Solid yttria-stabilized zirconia films by pulsed chemical vapor deposition from metal-organic precursors 2002
• Crystallization of polymer-derived silicon carbonitride at 1873 K under nitrogen overpressure 2002
• Intrinsic reaction and self-diffusion kinetics for silicon carbide synthesis by rapid carbothermal reduction 2002
• Pyrolysis kinetics for the conversion of a polymer into an amorphous silicon oxycarbide ceramic 2002
• Effect of weave architecture on tensile properties and local strain heterogeneity in thin-sheet C-SiC composites 2002
• Introduction to the special topical issue on ultrahigh-temperature polymer-derived ceramics 2001
• Nanoscale densification creep in polymer-derived silicon carbonitrides at 1350°C 2001
• Oxidation kinetics of an amorphous silicon carbonitride ceramic 2001
• Conversion efficiency or alkoxide precursor to oxide films grown by an ultrasonic-assisted, pulsed liquid injection, metalorganic chemical vapor deposition (pulsed-CVD) process 1999
• Morphology and sinterability of thermally treated carbothermally synthesized silicon nitride powders 1999
• Amorphous silicoboron carbonitride ceramic with very high viscosity at temperatures above 1500°C 1998
• Machinable ceramics containing rare-earth phosphates 1998
• Newtonian viscosity of amorphous silicon carbonitride at high temperature 1998
• High-temperature stability of the Al₂O₃-LaPO₄ system 1998
• Thermodynamic analysis of grain aspect ratio in fibrous microstructures of silicon nitride 1997
• Mechanism and kinetics of the carbothermal nitridation synthesis of alpha-silicon nitride 1997
• Domain structure second harmonic generation correlation in potassium niobate thin films deposited on a strontium titanate substrate 1996
• Crack initiation in fiber-reinforced brittle laminates 1996
• Hardness variations in multilayered ZrO2-Al2O3 composites 1996
• Controlled epitaxial nucleation of nickel oxide on microfabricated magnesium oxide substrates in a CVD process 1996
• Heteroepitaxial growth kinetics in a CVD process using nickel oxide on MgO as a model system 1996
• Space-charge-controlled diffusional creep: Volume diffusion case 1996
• Influence of grain size on ferroelastic toughening and piezoelectric behavior of lead zirconate titanate 1995
• METALORGANIC CHEMICAL-VAPOR-DEPOSITION BY PULSED LIQUID INJECTION USING AN ULTRASONIC NOZZLE - TITANIUM-DIOXIDE ON SAPPHIRE FROM TITANIUM(LV) ISOPROPOXIDE 1995
• STRUCTURE-OPTICAL PROPERTY CORRELATION OF EPITAXIAL POTASSIUM NIOBATE THIN-FILMS DEPOSITED ON MAGNESIUM-OXIDE(100) SUBSTRATES USING A STRONTIUM-TITANATE TRANSITION LAYER 1995
• CERAMIC COMPOSITES OF MONAZITE AND ALUMINA 1995
• ELECTRON-CYCLOTRON-RESONANCE PLASMA-ENHANCED METALORGANIC CHEMICAL-VAPOR-DEPOSITION OF TANTALUM OXIDE THIN-FILMS ON SILICON NEAR ROOM-TEMPERATURE 1995
• INDENTATION STUDIES ON Y2O3-STABILIZED ZRO2 .1. DEVELOPMENT OF INDENTATION-INDUCED CRACKS 1994
• FATIGUE MECHANISMS IN GRAPHITE/SIC COMPOSITES AT ROOM AND HIGH-TEMPERATURE 1994
• RAPID PROCESS FOR MANUFACTURING ALUMINUM NITRIDE POWDER 1994
• FUNDAMENTAL RESEARCH IN STRUCTURAL CERAMICS FOR SERVICE NEAR 2000-DEGREES-C 1993
• ANALYSIS OF THE SINTERING PRESSURE - REPLY 1993
• MECHANICAL-BEHAVIOR OF A LAMINAR CERAMIC FIBER-REINFORCED EPOXY COMPOSITE 1992
• TRANSFORMATION ZONE SHAPE EFFECTS ON CRACK SHIELDING IN CERIA-PARTIALLY-STABILIZED ZIRCONIA (CE-TZP)-ALUMINA COMPOSITES 1992
• KINETICS OF CARBOTHERMAL REDUCTION SYNTHESIS OF BORON-CARBIDE 1992
• RECOVERY OF CRACK-TIP TRANSFORMATION ZONES IN ZIRCONIA AFTER HIGH-TEMPERATURE ANNEALING 1992
• ENHANCED FRACTURE-TOUGHNESS IN LAYERED MICROCOMPOSITES OF CE-ZRO2 AND AL2O3 1991
• ACTIVATION-ENERGY FOR THE SINTERING OF 2-PHASE ALUMINA ZIRCONIA CERAMICS 1991
• CONTROL OF THE MICROSTRUCTURE OF ALUMINA ZIRCONIA ALLOYS STARTING FROM INORGANIC SALTS 1991
• GRAIN-GROWTH IN SUPERPLASTICALLY DEFORMED ZINC-SULFIDE DIAMOND COMPOSITES 1991
• DIRECT MEASUREMENT OF TRANSFORMATION ZONE STRAINS IN TOUGHENED ZIRCONIA 1991
• CRACK SHIELDING IN CERIA-PARTIALLY-STABILIZED ZIRCONIA 1990
• FRACTURE AND STIFFNESS CHARACTERISTICS OF PARTICULATE COMPOSITES OF DIAMOND IN ZINC-SULFIDE 1990
• TOUGHENING MECHANISMS IN CEMENTED CARBIDES 1990
• CRACK-TIP TRANSFORMATION ZONES IN TOUGHENED ZIRCONIA 1990
• EFFECT OF DIAMOND DISPERSION ON THE SUPERPLASTIC RHEOLOGY OF ZINC-SULFIDE 1990
• BETTER SINTERING THROUGH GREEN-STATE DEFORMATION PROCESSING 1990
• INSITU MEASUREMENT OF SILICA-GEL COATING ON PARTICLES OF ALUMINA 1990
• EFFECT OF INTERFACES ON THE PROPERTIES OF FIBER-REINFORCED CERAMICS 1990
• ESTIMATE OF THE ACTIVATION-ENERGIES FOR BOUNDARY DIFFUSION FROM RATE-CONTROLLED SINTERING OF PURE ALUMINA, AND ALUMINA DOPED WITH ZIRCONIA OR TITANIA 1990
• CYCLIC FATIGUE-CRACK PROPAGATION IN MAGNESIA-PARTIALLY-STABILIZED ZIRCONIA CERAMICS 1990
• ON THE THERMOELASTIC MARTENSITIC-TRANSFORMATION IN TETRAGONAL ZIRCONIA 1990
• EFFECT OF THE HEATING RATE ON THE RELATIVE RATES OF SINTERING AND CRYSTALLIZATION IN GLASS 1989
• NUCLEATION OF FLOCS IN DILUTE COLLOIDAL SUSPENSIONS 1989
• SUPERPLASTIC DEFORMATION OF ZINC-SULFIDE NEAR ITS TRANSFORMATION TEMPERATURE (1020-DEGREES-C) 1989
• FLAW GENERATION DURING CONSTRAINED SINTERING OF METAL-CERAMIC AND METAL GLASS MULTILAYER FILMS 1989
• REVERSIBLE TRANSFORMATION AND ELASTIC-ANISOTROPY IN MG-ZRO2 1989
• SINTERING AND CRYSTALLIZATION OF GLASS AT CONSTANT HEATING RATES 1989
• SHEAR AND DENSIFICATION OF GLASS POWDER COMPACTS 1989
• TYPE-II MAGNETIC LEVITATION ON SINTER-FORGED YBA2CU3OX SUPERCONDUCTOR 1989
• STRUCTURAL AND MECHANICAL PROPERTY CHANGES IN TOUGHENED MAGNESIA-PARTIALLY-STABILIZED ZIRCONIA AT LOW-TEMPERATURES 1989
• GRAIN-GROWTH TRANSITION DURING SINTERING OF COLLOIDALLY PREPARED ALUMINA POWDER COMPACTS 1988
• SINTER-FORGING CHARACTERISTICS OF FINE-GRAINED ZIRCONIA 1988
• SPATIAL VARIATIONS IN THE SINTERING RATE OF ORDERED AND DISORDERED PARTICLE STRUCTURES 1988
• CRACK RESISTANCE CURVES IN MAGNESIA-PARTIALLY-STABILIZED ZIRCONIA 1988
• COMPUTER-SIMULATION OF FAILURE IN AN ELASTIC MODEL WITH RANDOMLY DISTRIBUTED DEFECTS 1988
• MEASUREMENT OF THE SINTERING PRESSURE IN CERAMIC FILMS 1988
• SINTERING OF TIO2-AL2O3 COMPOSITES - A MODEL EXPERIMENTAL INVESTIGATION 1988
• PACKING AND SINTERING OF TWO-DIMENSIONAL STRUCTURES MADE FROM BIMODAL PARTICLE-SIZE DISTRIBUTIONS 1987
• ANALYSIS OF THE SINTERING PRESSURE 1987
• HIGH-STRENGTH ZIRCONIA FIBERS 1987
• MEASUREMENT OF INTERFACIAL MECHANICAL-PROPERTIES IN FIBER-REINFORCED CERAMIC COMPOSITES 1987
• ENHANCEMENT OF STRENGTH THROUGH SINTER FORGING 1987
• MICROSTRUCTURAL EFFECTS ON GRINDING OF ALUMINA AND GLASS-CERAMICS 1987
• LIQUID-PHASE BONDING OF SILICON-NITRIDE CERAMICS 1987
• UNSTABLE SPREADING OF A FLUID INCLUSION IN A GRAIN-BOUNDARY UNDER NORMAL STRESS 1986
• DIRECT OBSERVATION OF CYCLED PHASE-TRANSFORMATIONS IN ZIRCONIA 1986
• SHEAR DEFORMATION AND DENSIFICATION OF POWDER COMPACTS 1986
• KINETICS OF PRECIPITATION OF ALPHA-AL2O3 IN POLYCRYSTALLINE SUPERSATURATED MGO.2AL2O3 SPINEL SOLID-SOLUTION 1986
• ANALYSIS OF SINTERING OF A COMPOSITE WITH A GLASS OR CERAMIC MATRIX 1986
• REVERSIBLE STRESS-INDUCED MARTENSITIC-TRANSFORMATION IN ZRO2 1986
• STRENGTH CHARACTERISTICS OF TRANSFORMATION-TOUGHENED ZIRCONIA 1986
• SUPERPLASTIC FLOW IN FINE-GRAINED ALUMINA 1986
• RESIDUAL-STRESSES IN MACHINED CERAMIC SURFACES 1986
• EFFECT OF SILICON ACTIVITY ON LIQUID-PHASE SINTERING OF NITROGEN CERAMICS 1985
• EVALUATION OF RELIABILITY OF BRITTLE COMPONENTS BY THERMAL-STRESS TESTING 1985
• FAILURE MECHANISMS IN CERAMIC-FIBER CERAMIC-MATRIX COMPOSITES 1985
• SEGREGATION OF MG TO THE (0001) SURFACE OF DOPED SAPPHIRE 1985
• SINTERING BEHAVIOR OF CERAMIC FILMS CONSTRAINED BY A RIGID SUBSTRATE 1985
• SUPERPLASTIC DEFORMATION IN FINE-GRAINED MGO.2AL2O3 SPINEL 1985
• SUPPRESSION OF FROTHING BY SILICON ADDITION DURING OXYNITRIDE GLASS SYNTHESIS 1985
• AN INDENTATION METHOD FOR MEASURING MATRIX-FIBER FRICTIONAL STRESSES IN CERAMIC COMPOSITES 1984
• DIRECT OBSERVATION OF CRACK-TIP GEOMETRY OF SIO2 GLASS BY HIGH-RESOLUTION ELECTRON-MICROSCOPY - COMMENT 1984
• GEOMETRICAL EFFECTS IN ELASTIC PLASTIC INDENTATION 1984
• INFLUENCE OF HYDROSTATIC-PRESSURE AND HUMIDITY ON SUPERPLASTIC DUCTILITY OF 2 BETA-SPODUMENE GLASS-CERAMICS 1984
• MECHANISM OF SUPERPLASTIC FLOW IN A FINE-GRAINED CERAMIC CONTAINING SOME LIQUID-PHASE 1984
• MECHANISMS OF FAILURE FROM SURFACE FLAWS IN MIXED-MODE LOADING 1984
• CONTROLLED FLAWS IN CERAMICS - A COMPARISON OF KNOOP AND VICKERS INDENTATION 1983
• MEASUREMENT OF DYNAMIC HARDNESS BY CONTROLLED SHARP-PROJECTILE IMPACT 1983
• A SIMPLE METHOD FOR DETERMINING ELASTIC-MODULUS-TO-HARDNESS RATIOS USING KNOOP INDENTATION MEASUREMENTS 1982
• A THEORETICAL ESTIMATE OF SOLUTION-PRECIPITATION CREEP IN MGO-FLUXED SI3N4 1982
• DISSOLUTION KINETICS OF BETA-SI3N4 IN AN MG-SI-O-N GLASS 1982
• ELASTIC PLASTIC INDENTATION DAMAGE IN CERAMICS - THE LATERAL CRACK SYSTEM 1982
• LIMITING DENSITIES FOR DENSE RANDOM PACKING OF SPHERES 1982
• SEPARATION OF CAVITATION-STRAIN AND CREEP-STRAIN DURING DEFORMATION 1982
• A CRITICAL-EVALUATION OF INDENTATION TECHNIQUES FOR MEASURING FRACTURE-TOUGHNESS .1. DIRECT CRACK MEASUREMENTS 1981
• A CRITICAL-EVALUATION OF INDENTATION TECHNIQUES FOR MEASURING FRACTURE-TOUGHNESS .2. STRENGTH METHOD 1981
• ACTIVATION-ENERGIES FOR DENSIFICATION, CREEP, AND GRAIN-BOUNDARY SLIDING IN NITROGEN CERAMICS 1981
• COMMENT ON ELASTIC-PLASTIC INDENTATION DAMAGE IN CERAMICS - THE MEDIAN-RADIAL CRACK SYSTEM - REPLY 1981
• KINETICS OF DISSOLUTION AND CRYSTALLIZATION IN A BETA-SPODUMENE GLASS-CERAMIC 1981
• MICROMECHANICS OF FLAW GROWTH IN STATIC FATIGUE - INFLUENCE OF RESIDUAL CONTACT STRESSES 1981
• MORPHOLOGY AND STABILITY OF THE GLASS PHASE IN GLASS-CERAMIC SYSTEMS 1981
• RESIDUAL-STRESSES IN DYNAMIC FATIGUE OF ABRADED GLASS 1981
• EFFECT OF RESIDUAL CONTACT STRESSES ON MIRROR-FLAW-SIZE RELATIONS 1980
• ELASTIC-PLASTIC INDENTATION DAMAGE IN CERAMICS - THE MEDIAN-RADIAL CRACK SYSTEM 1980
• FLAW CHARACTERISTICS IN DYNAMIC FATIGUE - THE INFLUENCE OF RESIDUAL CONTACT STRESSES 1980
• FLAW GENERATION BY INDENTATION IN GLASS-FIBERS 1980
• THE ROLE OF GRAIN-BOUNDARY SLIDING IN FRACTURE OF HOT-PRESSED SI3N4 AT HIGH-TEMPERATURES 1980
• CONTACT-DAMAGE RESISTANCE OF PARTIALLY LEACHED GLASSES 1979
• CONTACT-INDUCED FAILURE OF PRESTRESSED GLASS PLATES 1979
• HARDNESS, TOUGHNESS, AND BRITTLENESS - INDENTATION ANALYSIS 1979
• RESIDUAL-STRESS EFFECTS IN FAILURE FROM FLAWS 1979
• STRENGTH DEGRADATION OF GLASS IMPACTED WITH SHARP PARTICLES .2. TEMPERED SURFACES 1979
• CONTACT-INDUCED STATIC FATIGUE OF ANNEALED AND TEMPERED GLASS 1978
• CONTACT-INDUCED STRENGTH DEGRADATION OF THERMALLY TREATED AL2O3 1978
• STRENGTH DEGRADATION OF THERMALLY TEMPERED GLASS PLATES 1978
• INDENTATION TECHNIQUE FOR MEASURING STRESSES IN TEMPERED GLASS SURFACES 1977
• α-Alumina and spinel react into single-phase high-alumina spinel in <3 seconds during flash sintering 2017
• Temperature Distributions During Flash Sintering of 8% Yttria-Stabilized Zirconia 2014
• Transverse thermal conductivity of thin C/SiC composites fabricated by slurry infiltration and pyrolysis 2000
• Debonding in multilayered composites of zirconia and LaPO4 1996